Reel to sheet litho laminator production line
Provincial labor: 3-4 people can replace 12-15 people
Reduce the amount of glue, reduce the weight of the face paper
The amount of glue can be reduced to below 20g/m2
It can reduce the gram weight of the top paper by 30~50g/m2
Improve the utilization rate of material paper
The mounting accuracy of the side gauge is greatly improved to ±0.5mm
2~5mm base paper can be saved on one side, and at least 4~10mm base paper can be saved on both sides
Calculated based on the base paper with a width of 1000mm, the utilization rate of the base paper can be increased by 4‰~10‰
Multi-function
Sheet-fed overlaid roll corrugated paper
Single three-layer corrugated (E, F, G) cardboard laminated to roll corrugated paper
Sheet Overlay Roll Jam
Roll paper overlaid roll corrugated paper
Roll paper overlaid roll paper
Optional
Corrugated Roll Preheating Station
Electro-hydraulic rail car
Automatic paper roll centering system
Automatic unstacking device
Performance characteristics
Taking into account both offset printing and pre-printing, offset printing does not need to change equipment, and pre-printing can significantly reduce costs.
Cassette type single-sided corrugator, quick change of corrugating rollers.
High-speed splicing machine, splicing paper without slowing down. Zero paper tails, less waste.
Uninterrupted color printing of single-sheet paper, without downtime for stacking.
Corrugated paper humidification system, leveling the cardboard, adjusting the humidity.
The corrugated paper is trimmed, and the waste is automatically discharged.
Servo synchronous cross-cutting machine, color mark detection, precise positioning and length.
Servo high-speed Laminating Machine, automatic synchronization of waste paper and surface paper.
High-speed stacking machine, positive and negative automatic stacking.
Video surveillance of the main operation position improves efficiency, increases production and reduces losses.
Equipped with a remote diagnostic system for easy machine maintenance.
Technical parameter:
| Max width | 1650mm |
| Min width | 500mm |
| Max line speed | 150m/min |
| Max laminating speed | 12000pcs/hour |
| Single paper laminating decision | Front gauge±1mm，side gauge±0.5mm |
| Roll paper position cross cutting decision | ±1mm |
| Max pile paper collecting speed | E flute 12000pcs/hour，B flute 10000pcs/hour |
| Max collecting height | 1800mm |
| Total power | 202kw |
| Machine dimension | 64500*5340*4530mm |
Contact Now
