ZX-850B Semi-automatic cardboard grooving machine
Product performance:
1.Environmental protection:clean and without noise.(Waste is bar type paper)
2.Adjust the slot distance with numerical hand wheel.
3.Convenient to lade and unload tools, and to blade knife without unloading.
4.Grinder has been installed with angle adjustment devise which makes grinding fast and accurate and without any requirements for workers.
5.Wide use: can be used in the V-grooving of cardboard and MDF.
Product features:
Easy operated:
1,Featured with digital presentation adjust device to adjust slot distance.
2,Manual adjust block to adjust the width.
3,Fix or unfix knife by loose or tighten the screw; no need to unload the knife while grinding.
4,The matched knife grinder is able to grind blade from various angle without technical.
Low cost:
1. The motor power is only 1.5KW, the lowest in China at present.
2. The blade can be grinded 80-100 times; after grinded it can be used 8000-10000 times with gray cardboard, And 12000-15000times with fibreboard.
3. New and used knife can work at the same time.
4. Lower slary is needed compared with a dust machine.
Good product: 1. It can slot"#"shape on cardboard, and"="shape on fibreboard.
2. The blade can be grinded in an accurate angle(max to 150o); slots' distance precision is±0.1mm; the machine Runs accurately all the same even when the cardboards is aside, which assures Linearity & precision.
Technical parameters:
Slot depth | 1-3.5mm |
Min. Slot pitch | 20mm |
Max.Slot | 5strips |
Min-height of box | 15mm |
Horizontal cardboard size | 120-850mm |
Vertical cardboard size | ≥150mm |
Motor power | 1.5kw/220v 1phase |
Speed | 15-25m/min |
Machine weight | 550kg |
Machine dimension | 1100*1400*1500mm |