Machine introduction
1. The model is suitable for use as a dedicated end fold and hanging fold
machine. The use of end folding accounts for more than 50% of the market. Every part
of this machine has been modified to make it simple and convenient to use.
2. The model is easy to operate and has superb performance. It is designed
especially for use with soft labels and for its smooth operation.
Using the Label Cutter Correctly, Effectively and Safely.
Please observe the following basic safety and preventive measures to ensure effective label
cutting operations and reduce the risk of accidents caused by disoperation:
1．Read this operating manual carefully before using the machine to ensure the
most effective use of your label cutter.
2
Only use the power supply type indicated on the machine. If unsure of
which power supply type, please ask your distributor or the local power
supply department.
3
For safety, confirm that the earth connector plug is connected before using
the machine.
4
Never place any objects on top of the power cord and ensure the machine is
located in a place where the power cord cannot be trodden upon or where it
may cause people to trip over.
5
The die, cutter blade and iron are high temperature components; be careful
not to touch the components when heating as it may cause burns.
6
The zone around moving parts and cutters are extremely dangerous, do not
put any solid objects or your hand in the area during operation.
7
Do not touch an electrical socket or electrical panel parts with damp hands.
8
The machine should operate at a temperature below 30oC with good
ventilation and normal humidity and with a relatively dust free
environment.
9
For convenient operation and safety, the machine should allow an operating
area that extends 1m around the actual size of the machine.
10
When moving the machine, a forklift must be used. Take care to prevent
against rain, place down gently and never turn upside down during
transport.
Contact Now
