Model No.:ZGFM series

ZGFM series Automatic high speed Flute Laminating Machine

1. Product description
1.1 function:

The paper can be laminated with paperboard to increase the strength and thickness of the material or special effects. After the die-cutting, it can be used for packaging boxes, billboards and other purposes.

1.2 Structure:

A. Upper Paper Feeder: It can send stacks of 150-800gsm paper from above.
B. Bottom feed: It can send 0.5~1Omm paperboard from below.
C. Gluing mechanism: The glued water can be applied to the fed paper.
D. Regulatory organization - Fits the two papers according to the set tolerances.
E. Pressurizing Conveyor... Presses the attached paper and conveys it to the delivery section.

1.3 Principles:

The top paper is sent out by the upper paper feeder and sent to the start detector of the positioning mechanism for detection. Then the bottom paper is sent out; after the bottom paper is coated with glue on the glue wheel, the top paper and the bottom paper are respectively conveyed to the paper Synchronous detectors on both sides, after the detection, the controller calculates the error value of the paper and the bottom paper, and the servo compensation device on both sides of the paper compensates the paper to a predetermined position for splicing, and then pressurizes the conveying. The machine presses the paper and conveys it to the delivery machine to collect the finished product.

1.4 Applicable Materials:

Paste paper --- 180 ~ 800g/m thin paper, cardboard.
Bottom paper---0.5~10m/m paperboard, single-sided cardboard, multi-layer corrugated paper, pearl board, honeycomb board, styrofoam board.
Glue - resin, etc., PH value between 6 ~ 8, can be applied to the glue.

Parameters:

Model	GFM1450
Max size	1450*1450mm
Min size	450*450mm
Paper	150-800g
Bottom paper	≤10mm ABCDEF corrugated board
Max speed	12000pcs/h
Power	25kw
Fit error	±1.5mm

	TRANSMISSION: With imported double teeth belt drive and Switzerland ROSTA tension device ensure the drive accurate, stable and low noisy.
	PRE-STACK PART: Pre-stack pile of paper under the condition of non-stop, improve efficiency. The special design of the pre stack paper frame, save time and effort.
	ELECTRICAL SYSTEM: Designed in the accordance with European CE requirement, ensure machine stability, high efficiency and low failure. Using man-machine interface and PLC combination, display all the information, such as warning, error detect, failures, and operating speed, etc on the screen at a glance.

Looking for ideal Flute Laminating Machine Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the High Speed Flute Laminating Machine are quality guaranteed. We are China Origin Factory of Automatic Flute Laminating Machine. If you have any question, please feel free to contact us.

Product Categories : Glue Laminator Machine > Flute Laminator