TECHNICAL INFORMATION
1.Main Technical Data
Max. Sheet Size: 720×1030 mm
Min. Sheet Size: 360×520 mm
Max. Printing Size: 705×1020 mm
Paper thickness: 0.04~0.6 mm
Blanket Size (with clip) ： 900×1040×1.95 mm
Plate Size: 800×1030×0.3 mm
Max. Speed: 12000 s/h
Paper Pile Height: Feeder /Delivery 1150/1150 mm
Main Motor Power: 37 (four color)/45(five color)/45(six color) kw
Total Weight: 35150(four color)/41500(five color)/47800(six color) kg
Overall Dimension
9240×3940×2408(four color) mm
10440×4110×2408(five color) mm
11640×4110×2408(six color) mm
2. Structure of the Press
Unit design, Double size impression cylinder and transfer cylinder
Ratio of cylinder diameter: P:B:I:T=1:1:2:2
3.Feeder Unit
high speed feeder
Straight lift paper suction, linear paper feeding, side blowing
aluminium alloy feeder deskboard, vacuum adsorption feeding belt
Feeder board is equiped with wheel brush presser bar
Inclination of the paper sheets adjustable at the feeder head
Lift distance adjustable according to sheet thickness
Air volume manually adjustable according to the sheet size, weight and the printing speed
Nozzle height adjustable by steel wire shaft and handle
Nozzle for paper pile skew
Tooth shaped electromagnetic clutch
Double sheets detector
Paper pile centering manually adjustable
Position of feeder head manually adjustable
Offer: Outline pre-stacking device
Non-stop paper feeding device
Electrostatic Remover
4. Paper Positioning
Conjugate cam paper feeding mechanism
Down-swing compound front lays, longer sheet positioning time
Sensors at the front lay for checking late and skewed paper sheets ,double sheet sensor 
Paper sheet size control
Front lays manually adjustable in vertical and longitudinal directions
Cam control side lay，easy for adjustment and stable for working
Inter locking mechanism for the in-feeder and the front lays
Offer: Plate and bar for pressing paper
5. Printing Unit
Stainless coatings on the impression Cylinder
All cylinders use anti-friction alloyed cast iron
High spot close grippers
Grippers and gripper pads replaceable independently
Roller support of plate cylinder and impression cylinder using high precision tapered roller bearing
Blanket cylinder support using INA high precision roller bearing for printing press
Cylinder bearer
Blankets with aluminum clippers for fast plate mounting
Gripper height fast adjustment device as per paper thickness
Quick-change plate holder
Front plate holder with positioning pins for preposition
Rear plate holder split into 3sections for adjusting fanning-out
Axial adjustment for the plate cylinder
Circumferential adjustment for the plate cylinder
Optional: PC control perforating machine
Roller gear with high frequency quenching alloy steel gear
Cam with nitriding or high frequency quenching surface
Roller engagement and disengagement device with conjugate cam mechanism
Form ink roller pressure adjustable by worm and gear
Ink quantity with electrical control
Ink fountain roller with high frequency quenching surface
Offer: Remote Inking Control System
PC on the control console and touch screen to control ink quantity, water quantity and electrical plate alignment
Ink adjustment key adjustable independently in console
Information of print and ink color accessible
Continuous lubricating device to lubricate the components in the cover, alarming for oil starvation
Alcoholic dampening system
Alcoholic system with automatic temperature control
Automatic alcohol proportioning
Negative pressure backwater and automatic water supply
6. Delivery
Delivery gripper system suitable for whole range of paper sheets, adjustment-free
Fully enclosed guide rails
Sampling device
Gear motor for paper pile hoist
Automatic lowering of paper pile
Fan sheet support device
Sheet flattening device
Fan sets for blowing down paper sheets
Brake roller whirl blower for air draft
Brake roller air draft adjustable independently
Electronic powder spraying device
Automatic dust collector
7.Electric control system
International good brand PLC control system
International good brand frequency converter
Frequency convertible main motor and water fountain roller motor
Water and ink supply, impression on/off, interlocking system, powder supply and pumps for delivery can be switched between manual and automatic control
Console touch screen control (water volume, electric calibration)
Display of faults (including braking protection, sheet positioning fault, safety protection, lubrication faults, frequency converter protection and motor protection )
Display of printing parameters
Print volume settings
Communication cable transmission control
Main motor with brake
Push button lamp
Inching speed ≤5m/min
Alarming before starting operation
Safety devices equipped on safety guards on the printing unit, pedals between printing units and other positions in the press
8. Others
Offer: One color set of rubber roller core
Offer: One set of tools
（this technical configuration is only for reference when ordering. The actual configuration of the machine is subject to the material object and the machine manual.)
XJ1030 SERIES Coating Unit
Technical configuration
1. Main Technical Data
2. PS plate size： 800×1030 mm
Resin plate size： 800×1030 mm
Power： anilox roll motor 1.1 kw
Infrared（Or ultraviolet） drying system 57 kw
3. Coating unit
Double size impression cylinder and transfer cylinder
Stainless coatings on the impression cylinder.
High spot close grippers
Grippers replaceable independently
Integral gripper pad
Roller support using non clearance special roller bearing
Plate cylinder using eccentric bearing structure, and the clutch is portable.
Rear plate holder split into 3 sections for adjusting fanning-out.
Roller gear with high frequency quenching alloy steel gear.
Cam with nitriding or high frequency quenching surface.
Form ink roller pressure adjustable by worm and gear.
Anilox roll standard match 200 mesh, other specification is chosen by the customer
Automatic coating cycle system
chamber doctor blade closed system
The speed of the anilox roll can be rotated or rotated at the same speed.
Automatic tracking of machine speed by anilox roll speed
3.Infrared drying system
Two sets of infrared（Or ultraviolet ）light boxes
One set of hot air light boxes
High Voltage Pit current Control Technology
Infrared（Or ultraviolet） lamp power 18 kva/set
Short wave infrared （Or ultraviolet）halogen lamp 0.75-2.5um
Each group of light boxes can be switched on and off separately, and the power of the light box can be adjusted in sections.
Exhaust gas
The components adopt international famous brand
The exhaust duct is made of high temperature resistant and flexible material
Automatic Protection of leakage Fault in Electrical apparatus of whole Machine
All fault alarm records are archived and can be consulted at any time.
4.Other parts
Paper glass window anti-ultraviolet film
Contact Now
