PX-2412 fully automatic Single Dragon Gate Transverse Carton Creating Machine

Features of the entire machine:

1. The structure of this machine is a perfect combination of traditional wire collision machines and modern technology.

2. The suction belt paper feeding mechanism surpasses the paper feeding structure and has almost zero compressive loss on the cardboard box, maximizing the solution to users' worries.

3. The positioning structure of the collision knife not only ensures speed, but also avoids the size and deviation of the cardboard box cover.

4. PLC (computer) controls the layout size, with an electric adjustment accuracy error of ± 0.5mm. Equipped with manual fine tuning.

5. The high-strength design of the single gantry knife ensures that the indentation depth of the high-strength cardboard is uniform, and the box is beautiful.

6. The design and structure of this machine are reasonable, maintenance is just changing, the leather is sturdy and durable, the operation is simple, and the requirements for staff quality are relaxed.

7. This machine is equipped with sheet feeding to maximize the range of cardboard processing.

8. Gear and chain transmission, made of high hardness material 20cmo, with precision and long lifespan.

9. The bearings of the entire machine are all made of high-quality Havalo bearings, and the entire set of electrical appliances is made of products from Chint and Delixi companies.

The machine has a clear human-machine interface, simple operation, and is easy to operate.

11. This machine is equipped with a driving warning and zero warning device to ensure the safety of the front and rear operators of the equipment.

Configuration instructions:

1. The wall panel thickness of the entire machine (30mm) and the upper and lower blade arms on the collision line are made of high-quality castings.

2. Imported machining centers ensure accuracy in processing.

3. The control panel is a Kunlun connected touch screen, with intuitive and flexible operation.

The control system is controlled by VTGOR-PLC and fed back to the encoder for automatic recognition.

5. Transmission mechanism gear and chain transmission.

6. The conveyor wheel, sun wheel, and conveyor belt are all made of imported high-quality nitrile rubber.

7. The transmission bearings are all Hawaro bearings.

8. The conveyor belt shaft and various power shafts are processed using static and dynamic balance.

9. The host of this machine adopts Hengshui X variable frequency motor.

 Schematic diagram and operating instructions of the operation panel

Special attention!!!

1. Please be sure to ground according to the three-level standard.

2. Please check if the internal wiring is loose due to transportation or other reasons.

3. Cut off the power supply during any testing and maintenance.

4. Non professionals are not allowed to modify the internal wiring at will to avoid danger.

This system consists of PLC, HMI (Human Machine Interface), peripheral switch buttons, contactors, and other electrical components

Composition, stable performance, and simple operation.

Control buttons and HMI operation instructions:

Count reset is to clear the displayed value of the number of sheets to zero.

The position required in the above figure is to input the required box cover and box height for the touchline cardboard, and then press the automatic adjustment button to adjust it.

During the adjustment process, you can press the control stop button to stop the adjustment.

The current position in the above figure refers to the current machine production specification "Line collision position of box cover and box height".

Enter the corresponding order number and press the "Read Order Number" button to automatically read the order to the required location.

Enter the corresponding order number and press the "Save by Order Number" button to automatically store the data in the required location in the order according to the order number.

When adjusting, please correct first. The current position displayed must match the actual specifications of the cardboard in order to automatically adjust accurately

   Do not change the motor coefficient setting of 500

Correct as follows: First touch a piece of cardboard to measure the size of the box cover and box height. Enter the size of the box cover in the calibration value gauge 1, and then enter the size of the box cover and box height in the calibration value gauge 2. Then press the calibration buttons of gauge 1 and gauge 2 to return to the current position on the main interface. If it matches the size of the cardboard being touched, the correction is correct. If it does not match, please re-enter the correction error

1. All movable parts on the device are not allowed to be moved casually.

2. Electrical appliances should be protected from sunlight and rain.

3. Regularly inspect all components, check if the fastening components are normal, and adjust the fastening in a timely manner.

4. Regularly and regularly add lubricating grease to each transmission component to ensure good transmission performance of the equipment.

5. This manual is for reference only. For details, please carefully listen to the explanations provided by the installation and debugging personnel.

6. Equipment grounding safety ground wire. The staff shall take necessary protective measures.